USB acquisition
Confirm operating system, software interface, sampling rate and filtering. A 24-bit converter describes its architecture, not guaranteed effective resolution.
MT-AMP-KIT / SERIES
Pre-Calibrated USB Readout & PLC Amplifier Kits
Pair a load button with a handheld display, a 24-bit USB acquisition interface or an industrial analogue / RS485 conditioner. Define the sensor and electronics as one calibrated measurement chain.
- Outer diameter
- Sensor selected separately
- Installed height
- Module-specific
- Mounting
- Handheld, USB interface or DIN rail
- Accuracy envelope
- Paired system calibration, configuration dependent
OD × height × compression capacity.
| Outer diameter (OD) | Height (H) | Series / fit | Button radius | Capacity (N / kgf / lbf) |
|---|---|---|---|---|
| Sensor selected separately | Module-specific | MT-AMP-KIT ↗Laboratory acquisition & PLC integration | Sensor-specific | Matched to selected sensor |
Series options are not a full cross-product of every dimension and capacity. Button radius, tolerances, overload and model-specific performance are confirmed on the released drawing and quotation.
Move from a millivolt bridge to usable force data.
PLC signal mapping
Specify 0–10V, 4–20mA or RS485, supply voltage and the intended full-scale mapping. Keep sensor excitation separate from the PLC signal input.
Multiple fingertips
Define channel count and allowable timing skew. Several independent USB interfaces do not automatically provide simultaneous sampling.
The load path mattersLoad the convex button.
Load the convex button.
Give the cable room to move.
A compact sensor only measures correctly when the surrounding fixture supports it correctly.
Support the intended base surface
Machine a rigid, flat seat from the exact outline. Locate the sensor without squeezing the case or bypassing the sensing load path.
Keep contact on the central button
Align compression with the sensing axis. Keep the tool clear of the cover and outer case; a spherical top helps accommodate small alignment differences.
Relieve the fine shielded cable
Provide a dedicated exit channel and jacket retention. Specify flexing, bend space and a strain-relief spring or sleeve with the configuration.
Engineering RFQ / samplesTell us the space.
Tell us the space.
We’ll help size the sensor.
Share the maximum diameter, installed height and compression range. We’ll review the force path, propose a series and confirm the drawing and output configuration.
What happens next
- Mechanical & electrical fit review
- Configuration and calibration proposal
- Sample quotation with confirmed lead time
Prefer email? Contact sales@magatom.com. Inquiries are received by our dedicated button load cell mailbox.